Products and Services

Products and Services

  info@alemlube.com.au  1300 159 311
Search Results – 37 products found for: Pulsarlube
Product

Pulsarlube AIR® Desiccant Breather

Pulsarlube

Product Code: AB-PD100

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube Explosion Proof Grease Lubricator

Pulsarlube

Product Code: EXP240

• Grease pouch capacity of 240ml (replaceable)
• Dispenses 0.34ml/stroke @ 20ºC
• Dispensing periods of 1,2,3,6,9 and 12 months
• IECEx & ATEX & KCs & NEPSI certified
• IP65 - dust tight and protected against water jets
• Auto lock out mode to prevent unintentional mode changes
• Easy to check LCD displays with backlight function
• Power supply: DC 4.5V Battery Pack (replaceable)
• Remote installation possible up to 6m with 6mm tube

IP Code: IP65

Product

Pulsarlube AIR® Dessicant Breather

Pulsarlube

Product Code: AB-PD101

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Dessicant Breather

Pulsarlube

Product Code: AB-PD102

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1" Adaptor

Pulsarlube

Product Code: AB-PD100C

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1" Adaptor

Product Code: AB-PD102C

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 3/8" Adaptor

Pulsarlube

Product Code: AB-PD101A

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1/2" Adaptor

Product Code: AB-PD102B

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 3/8" Adaptor

Pulsarlube

Product Code: AB-PD102A

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1" Adaptor

Pulsarlube

Product Code: AB-PD101C

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1/2" Adaptor

Pulsarlube

Product Code: AB-PD100B

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 3/8" Adaptor

Pulsarlube

Product Code: AB-PD100A

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1/2" Adaptor

Pulsarlube

Product Code: AB-PD101B

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube Explosion Proof Grease Lubricator

Pulsarlube

Product Code: EXP480

• Grease pouch capacity of 480ml (replaceable)
• Dispenses 0.34ml/stroke @ 20ºC
• Dispensing periods of 1,2,3,6,9 and 12 months
• IECEx & ATEX & KCs & NEPSI certified
• IP65 - dust tight and protected against water jets
• Auto lock out mode to prevent unintentional mode changes
• Easy to check LCD displays with backlight function
• Power supply: DC 4.5V Battery Pack (replaceable)
• Remote installation possible up to 6m with 6mm tube

IP Code: IP65

Product

E 120cc PL1 - Single and Multi Point Grease Lubricator

Pulsarlube

Product Code: E120/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• IP code: IP68
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases, and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube
• 1/4” BSP male connecting thread
• Dispensing period 1,3,6,9 and 12 months.

Product

M 500cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M500/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

E 120cc Empty - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: E120/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

125/250cc V125/Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V125/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• IP Code: IP68 
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases, and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube
• 3/8” BSP male connecting thread
• Dispensing period 1,3,6,9 and 12 months.

Product

M 250cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M250/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

E 240cc PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: E240/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

M 125cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M125/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 125cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M125/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

500cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV502/PL1

The Service Pack must be replaced when monthly cycle is finished

Service Pack consists of
• A grease pouch of selectable lubricant type in various volumes
• An OEM battery pack : DC 4.5V Alkaline battery pack (standard) or DC 4.5V Lithium battery pack

* Note: A battery pack is not included in the MSP and PLC service packs
A disposable dust cover: PVC dust cover (standard) or U/V protection dust cover

* Note: A dust cover is not included in the PLC service packs

• 60,125, 250 & 500 available with different grease options: contact us

Product

M 250cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M250/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

E 60cc PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: E60/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

250cc V Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V250/EMPTY

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant.
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 60, 120 & 240cc

Product

250cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV250/PL1

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant.
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 60, 120 & 240cc

Product

M 60cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M60/PL1

• Pumps grease up to 30bar
•  Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

E 60cc Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: E60/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

M 60cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M60/MAIN

• Pumps grease up to 30bar
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 12

M125/250: Minimum 1/2 month to maximum 12 months
M500: Minimum 1/2 month to maximum 24 months

Product

M 500cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M500/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

E 240cc Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: E240/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

SV Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V250/EMPTY

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 125, and 250cc

Product

V125/PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV125/PL1

• Easy to replace by hand no tool required
• Available with 60, 125, 250 & 500cc

Product

60cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV60/PL1

• Available with 60, 125, 250 & 500cc

Product

Single and Multi Point Grease Lubricator Counter Display

Pulsarlube

Product Code: Pulsarlube Counter Displays

The Pulsarlube Single and Multi Point Grease Lubricator Counter display units provide an informative and concise means of marketing the features and benefits of these versatile lubricators, right at your sales counter.
Requiring very little space, each unit displays the actual product allowing the customer to accurately gauge the size and potential applications of the grease lubricators and to be aware of their functions, features and full specifications.

Product

Multi-point Complete Kit

Pulsarlube

Product Code: 1250MD-2-8

• Remote installation lubricates 8 greasing points
• Operating pressure of 425psi (29bar)
• Consists of a vertical pump, motor/gear set and microprocessor
• Ideal for hard to reach/hazardous greasing locations such as electric motors, pumps, conveyors, fans and cranes
• Kits are available to suit 2, 3, 4, 5, 6, 7 & 8 greasing points
• Actual lubricator not included