Products and Services

Products and Services

  info@alemlube.com.au  1300 159 311

Waste oil evacuators

Product

Evacuator - Waste Oil 10LPM 240V

Piusi

Product Code: 271900N

New version from Piusi (replaces 271900)
240v dipstick probe style model with continuos operation
Automatically shuts off pump when all oil has been extracted with audible alarm Internal self priming pump, pumps waste oil to a waste oil tank
Vacuum meter shows unit is operating
Flow rates: up to 10LPM when oil is hot
Noise: less than 65 db
Inlet / outlet: 1/2" BSPF
Complete with wall mount bracket, set of probes & hose

Product

Mobile Waste Oil Extractor

Product Code: 30091

• Extracts and captures waste oil from crankcases, transmissions and differentials
• Clear inspection chamber capacity of 12L
• Holding tank capacity of 80L
• Chamber depressurisation time of 25 seconds
• Suction speed of 6.5 L/min
• Suction hose specification of 1/2” x 2,000mm
• Draining hose length of 1” x 2,000mm
• Draining pressure of 14psi (1bar)
• 1/4” air inlet connection
• 12 month warranty
• 30090 Mobile waste oil extractor without clear inspection chamber

Product

Mobile Waste Oil Extractor

Product Code: 30090

• Extracts and captures waste oil from crankcases, transmissions and differentials
• Holding tank capacity of 80L
• Chamber depressurisation time of 25 seconds
• Suction speed of 6.5 L/min
• Suction hose specification of 1/2” x 2,000mm
• Draining hose length of 1” x 2,000mm
• Draining pressure of 14psi (1bar)
• 1/4” air inlet connection
• 12 month warranty

Product

Waste Oil Evacuator, 100L

Product Code: 372600

Venturi effect creates vacuum to suck waste oil out of vehicles dipstick by way of probe accessories
Can be used as an autonomous unit , disconnected from air (once primed)Discharge hose is 1.6m & works by attaching unit to a tyre inflator with air on continuously

Product

Waste Oil Evacuator, 100L, 10L Clr Bowl

Samoa

Product Code: 372100

Samoa
Includes a 10 litres transparent chamber that can be used as vacuum reservoir and allows an immediate inspection of the extracted waste oil
Venturi effect creates vacuum to suck waste oil out of vehicles dipstick by way of probe accessories
Can be used as an autonomous unit , disconnected from air (once primed)Discharge hose is 1.6m

Product

Waste Oil Evacuator, 24L Reservoir

Product Code: 371600

Lightweight/portable waste oil changer/extractor ideal for boats
The reservoir, wheel mounted, has a capacity of 24 litres
Suction capacity after vacuum: 13-16 litres
Suction time with HOT oil (70/80c) and probe diameter 6mm, is 1.5-2 litres per minute
Suction hose: 2 metres
Gravity discharged by removing the cap on top of the unit

Product

Waste Oil Evacuator, 6.5L, Manual Operator

iCan

Product Code: 41006

Manual Waste Oil Extractor
Portable, lightweight self contained unit
Ideal for extracting waste oil from motor vehicles, motor bikes, marine engines, lawn mowers & stationary engines. It can also be used for non lubricants such as salt water (Bilge) & water etc
Automatic off - will stop operating when waste oil is extracted.
Fast operation Ð can extract six litres of waste oil in five minutes
Capacity of container: 6.5 Litres
Complete with probe kit to suit various dipsticks
Prime vacuum by pumping lever up and down several times then stop as unit draws fluid out by venturi suction
Warning: Container is not to be used for long term oil storage. If used with salt water, the container must be flushed with fresh water after use
Ensure when using on engine oil that vehicle has been run for 5 minutes to ensure oil is hot & thin for fast extraction