Needle type
Product Code: 41009
• Easily fits most standard sized 205L drums
• Durable, non-corrosive and chemical resistant polyethylene construction
• Stainless steel strainer protects against foreign particle contamination
• Suitable for use with oil, diesel, petrol, kerosene, water and all fluids compatible with polyethylene
• Works with most hand & air operated drum pumps
• Raised rim reduces splashes and spills
• Minimises valuable resources waste
• Assists in reducing clean up costs
• OH&S friendly helping to avoid the risk of slip & fall accidents
• Exterior height: 7cm
• Exterior diameter: 61cm
• Interior height: 5cm
• Interior diameter: 51cm
• Weight: 1.36kg
Product Code: 318004
Product Code: 361300
• Simplifies plumbing and allows the use of just one pump
• Easily changes the flow from filling to emptying
• Designed and manufactured in Europe
• Maximum working pressure of 217.5psi (15 bar)
• 4 x 1" BSP (f) threads
• Dimensions of 110mm x 84mm
• Weight of 1.7kg
Product Code: 535830
• Air pressure operating range: 30 to 175 psi (2 to 12 bar)
• Double acting air operated 8:1 ratio transfer stub pump
• Handles synthetic/mineral engine oils, hydraulic oil, gear oil and ATF
• Air consumption: 350 Nl/min (12.4 scfm)
• Maximum fluid outlet pressure: 1,400psi (96 bar)
• Air motor effective diameter: 80mm
• Air motor stroke: 80mm
• Flow rates of up to 17 L/min
• 3/8" BSP (f) air inlet
• 1" BSP (f) fluid inlet / 1/2" BSP (f) fluid outlet
• Wetted & seal materials:
• Cast Iron, Hard Chrome Steel, Steel, Polyurethane and NBR
• Noise level: 80 dB
• Total pump height: 487mm
• Weight: 6.8 kg
Product Code: 46000
• Crushes standard car oil filters in less than 30 seconds
• Maximum operating pressure of 220psi (15bar)
• Creates up to 5 tonnes of crushing pressure
• Removes up to 95% of waste oil
• Operates with normal workshop compressed air
• Suits filters with max height of 235mm & max width of 140mm
Product Code: 46001
• Crushes standard car oil filters in less than 30 seconds
• Maximum operating pressure of 220psi (15bar)
• Creates up to 5 tonnes of crushing pressure
• Removes up to 95% of waste oil
• Operates with normal workshop compressed air
• Suits filters with max height of 235mm & max width of 140mm
Product Code: 318003
Lightweight and durable cast aluminium
For the removal and fitting of 2" and 3/4" drum plugs
An essential workshop tool
Product Code: 318008
Product Code: 380372-B1
Alemite USA made
Sturdy units installed near supply pumps in pipeline ensure clean lubricant
Offer little flow restriction
Filter elements are readily accessible for cleaning
Element: 328628
Pressure rated to 6,000psi
Element porosity: 138 micron
Product Code: 380372-A1
Alemite USA made
Sturdy units installed near supply pumps in pipeline ensure clean lubricant
Offer little flow restriction
Filter elements are readily accessible for cleaning
Element: 384847
Pressure rated to 6,000psi
Element porosity: 40 micron
Product Code: 367015
Suction tube complete with foot valve, 2" bung adapter
Hose Length: 1.5m
Tube Diameter: 42mm suits 205L drums and 1000L tanks
Includes 1" pump connection adapter for 1:1 351110 or 5:1 347100
(3:1 353110 requires 3/4" connection hose 367000)
Product Code: 318001
Gravity cock for horizontal oil drums with spring loaded push valve
Material: Aluminium with Nitrile rubber seal
Dimensions: ¿70 x 137mm
Conn. thread: 2" BSP(m)
Product Code: 360115
For mounting a three reel bank
Dimensions: 825 x 308mm
Product Code: 360117
For mounting a five reel bank
Dimensions: 1375 x 308mm
Product Code: 775000
775000 Oil Monitoring And Control System
• Designed for easy integration
• Controls up to 12 reels as a stand alone or PC-interfaced system
• 240 Volt
• Up to 32 modules can be networked
• Maximum of 900 users and 9,999 job numbers
• Windows environment software is simple and user friendly
Product Code: 364001
Straight Swivel MxF 1/2" bsp
Suitable for most metered and non metered oil control valves
Product Code: 88-RA
88-RA Alemlube Reike 20L Drum Bung Adaptor
Alemlube Reike 20L drum bung adaptor
Product Code: 326463-B1
Alemite USA made
326463-B1 fits pump tubes with a 1.375" diameter. 8550,9911-1,9950-1,9979
Strainers clamp on bottom of pump tube
Prevents foreign materials from entering suction tube and obstructing pump mechanism
Suits all 85, 96 & old style 99 (single acting) series grease pumps
Product Code: 326463-A1
Alemite USA made
326463-A1 fits pump tubes with a 1.125" diameter . 9611,9911,9650,9950
Strainers clamp on bottom of pump tube
Prevents foreign materials from entering suction tube and obstructing pump mechanism
Suits all RAM Double Acting grease pumps
Product Code: 326432
Alemite USA made
Strainers clamp on bottom of pump tube
Prevents foreign materials from entering suction tube and obstructing pump mechanism
For heavy duty pump models
Product Code: 307980
An air chamber to install vertically at the pump outlet in order to reduce pulsations in short distribution oil lines
Connection threads: 1/2" BSP (M/F)
Product Code: 362912
Relieves pressures built up in large workshop oil lines where heat and cold expansion creates pressures when using air operated pumps
For protection against system pressure increase due to oil thermal expansion (1¼C increase in temperature can cause 10 bar increase in system pressure)
870psi valve opening pressure
Can connect to either a ¯ 1/4" hose with a clamp or a hose with 1/8" BSP (F)
Inlet/Outlet: 1/2"F / 3/4"M
Product Code: 609007
Relieves pressures built up in large workshop oil lines where heat and cold expansion creates pressures when using air operated pumps
For protection against system pressure increase due to oil thermal expansion (1¼C increase in temperature can cause 10 bar increase in system pressure)
870psi valve opening pressure
Can connect to either a ¯ 1/4" hose with a clamp or a hose with 1/8" BSP (F)
Inlet/Outlet: 1/2"F / 3/4"M
Product Code: 362913
Relieves pressures built up in large workshop oil lines where heat and cold expansion creates pressures when using air operated pumps
For protection against system pressure increase due to oil thermal expansion (1¼C increase in temperature can cause 10 bar increase in system pressure)
870psi valve opening pressure
Can connect to either a ¯ 1/4" hose with a clamp or a hose with 1/8" BSP (F)
Inlet/Outlet: 3/4" MxF
For Pump Master 4 and 6 pumps
Product Code: 318002
Meets & exceeds OH&S requirements for non spill of oils, other petroleum based fluids & many other liquids
Only one valve required for multiple drums
Made from Steel, aluminium & Viton seals so suitable for a variety of fluids
Fill drums by turning them 180 degrees around in their rack / trolley
Product Code: 360102
Samoa
Suits most air operated pumps
For wall mounting of stub or bulk tank pumps
Bung adaptor sold separately