Products and Services

Products and Services

  info@alemlube.com.au  1300 159 311
Search Results – 17 products found for: Wheel Alignment
Product

Automotive 4.5t 4-Post Wheel Alignment Hoist

Alemlube

Product Code: AA454PA

• Heavy duty lifting capacity of 4,500kg
• Overall length of 6,288mm
• Overall width of 3,342mm
• Width between columns of 2,742mm
• Conventional 4 post hoist designed for precise wheel alignment procedures and general under vehicle service operations
• Integrated rear wheel slip-plates
• Maximum lifting height of 1,896mm
• Minimum lowered height of 246mm
• Minimum descent time of 60 seconds
• Air operated safety lock system
• Economical 3 phase power
• Aluminium motor for improved cooling capacity during high work demands
• Low voltage controls offer greater operator safety
• Quality components throughout including Italian made hydraulic pumps
• Optional rolling hydraulic jacking beams available
• Compliant with Australian Standards
• Manufactured to stringent European CE Standards

Product

4.0t 4-Post Wheel Alignment Hoist with Integrated Jacking Beams

Product Code: AA404PA-WF

• 4 post hoist designed for precise wheel alignment procedures and general under vehicle service operations
• Heavy duty lifting capacity of 4,000kg
• Integrated 2 tonne Jacking beams x 2
• Overall length of 5,704mm
• Platform Length of 4,610mm
• Integrated rear wheel slip-plates
• Turntable recesses with cover plates
• Maximum lifting height of hoist 1,800mm with Jacking beam 510mm
• Minimum lowered height of 225mm with Jacking beam 190mm
• Lifting Speed: Main Hoist: 50sec, Jacking beam: 8sec
• Lowering Speed: Main Hoist: 35sec, Jacking beam 5-15sec
• Wired remote control for hoist and Jacking beams
• Economical 3 phase power
• Compliant with Australian Standards
• Total weight 1,600kg

Product

4.0t 4-Post Wheel Alignment Hoist

Ravaglioli

Product Code: RAV4402

• Lifting capacity of 4 tonne
• Adjustable platforms to accommodate different vehicle widths optimises access to the underside of a vehicle
• Automatic mechanical back up safety devices with pneumatic release allow for stationary operation with loaded cables
• Immediately triggered safety stud devices operate in the event of a cable slackening or failing
• An automatic anti-toe trapping alarm during the final stages of vehicle hoist descent supplied standard
• Mechanical, electrical and hydraulic safety devices all in compliance with Australian and CE Safety Standards
• Includes rear slip plates and wheel alignment turntable recesses

Product

Touchless Wheel Alignment System

Alemlube

Product Code: AAP ARGOS

Measuring in a blink - Measure toe and camber in less than 5 seconds

Measuring process automatically starts at the arrival of the vehicle

Instant touchless measurement without exiting the vehicle

No manual adjustments for cars with different wheelbases

No clamps, targets or sensors

Rim run-out not compulsory

No need to remove hubcaps

No brake pedal required to measure caster

Automatic locking & unlocking turntables

Remote vehicle specs selection

No obstructions around lift or wheels

No moving parts, no bulky cabinet

Automatic pre-selection of vehicles’ specifications

Remote software control & measurements visualisation

Fitting to every type of lift or pit for touchless wheel alignment.

Camera support for the positioning of vehicles on the turntables

Eliminate any effort and time for aligner’s measurements

Thorough check all your customers’ vehicles

Find out more vehicles that need adjustments

Increase turnover and customers’ satisfaction

Manufactured in Italy

Product

4-Post 6.5T wheel alignment hoist

Product Code: RAV4652L

Product

Ravaglioli 5.0t Electro-Hydraulic 4-Post Wheel Alignment Hoist

Ravaglioli

Product Code: RAV4502L

Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates

Hydraulic cylinder is located inside the fixed platform and thus perfectly protected

High resistant, galvanised and pre-stretched metal cables

Automatic mechanical back-up safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables

Manufactured in Italy

Product

4-Post 8T wheel alignment hoist

Product Code: RAV4802

Product

5T 4 Post Wheel Alignment Hoist OPEN FRONT

Ravaglioli

Product Code: RAV4506OF

• Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates
• Hydraulic cylinder is located inside the fixed platform and thus perfectly protected
• High-resistant, galvanised and pre-stretched metal cables
• Large-diameter pulleys with self-lubricating and maintenance free bushes
• Adjustable platform to accommodate different vehicle tracks
• Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables
• Immediate-triggering safety stud devices in case a cable slackens or fails
• Automatic anti-toe trap alarm during final stages of hoist descent
• Mechanical, electrical and hydraulic safety devices (CE marking)
• Extra-long platforms for total wheel alignment, with front turning plates locations and rear slip plates

Product

4.2t Wheel Alignment Scissor Lift

Ravaglioli

Product Code: RAV640.2

• Large size platforms and sturdy structure assuring maximum rigidity and working stability
• Platforms for total wheel alignment, with front turning plates locations and rear slip plates
• Rear slip plates with pneumatic locking in true position, angular and transversal movements in both directions

RAV650.2.55 5t and RAV660.2.55 6t also available

Product

Ravaglioli 3D All-On-Wall Wheel Alignment System

Ravaglioli

Product Code: RAV3D2.0WALL3S

Space Saving Wheel Alignment

• Wall mounted wheel alignment system saving space using a wall

  mounted tablet, wall mounted 3D measuring heads and clamps

• 2 compact and lightweight 3D measuring heads

• PC free Bluetooth enabled lightweight tablet with adhesive
   magnets for wall mounting

• Set of four wall mounted self-centering 3-point clamps 

3D measuring head features

• 3D targets are installed on the measuring heads which are
   battery charged on the wall dock for 8 hours of usage

• Measuring heads are connected to a quick release coupling
   system on the vehicle lifter

• Measuring heads are lightweight and maintenance free

• LCD display on heads for primary information

• 5MP resolution display, remote control function, weight 3kg

• Magnets on wall charging station with LED charging indicator

• Compact design with rubber and plastic protection

Product

Ravaglioli 8CCD All-On-Wall Wheel Alignment System

Ravaglioli

Product Code: RAVTD2 0WWIFI

Space Saving Wheel Alignment

• Wall mounted wheel alignment system saving space and using
   a wall mounted tablet with wall mounted measuring heads

• 8 CCD cameras with sensors used. The charged coupled devices
   accurately measure all alignment parameters

• PC free Bluetooth enabled lightweight tablet with adhesive
  magnets for wall mounting or attaching to vehicle lifter

• Two wall mounted panels for recharging the measuring heads 

   and a USB port for charging the tablet

• Four self centering 4-point clamps supplied

• Four wall holders supplied to fix clamps onto the wall


Ease of use tablet features

• Operators monitor wheel alignment operations using a tablet

• 10” multi-touch tablet with 1280 x 800px resolution

• Lightweight with a modern design, dust and water resistant,
  adhesive magnets, 64GB of memory, 2MP front camera, 5MP
  rear camera, weighs less than 700g, fall resistant up to 76cm

• Bluetooth connection

Product

Layout Plans

Alemlube

Product Code: Alemlube

The Ultimate Modern Automotive Workshop

The completed layout plan is effectively a working drawing to hand over to the builder, electrician, plumber etc. The plan indicates to you exactly what Alemlube will be proposing in a tender for the service workshop fitout.

Alemlube is instrumental in achieving a state of the art service facility, literally from start to finish and continues to provide ongoing equipment requirements and maintenance support to workshops throughout Australia and New Zealand.

The vision and objective is to create a clean, practical and efficient workshop with minimal unnecessary obstruction. 

A key objective may be to conceal all pipework underground rather than a network travelling on walls and suspended from ceiling brackets.

Following extensive consultation with management, the Alemlube team set about designing workshop layouts, reticulation grids and fluid storage requirements with a view to maximise available space that result in a practical, functional and efficient working environment, clearly outlined in a specific brief.

Equally important is working with architects and project managers focusing on delivering the best possible outcome in line with exacting specifications and requirements. An exercise that Alemlube has undertaken and completed time and time again.

A typical dealership fitout may including the following:

• Fully equipped with 24 vehicles hoists - comprising 4 post,
• 2 post, scissor and wheel alignment models - strategically positioned in three rows with access from two lanes and a central drive through
• Three runs of sliding rail fume extraction systems cover all hoists
• A fully piped fluid reticulation network supplies all workbays with oil, fluids, water, air and incorporates waste oil evacuation lines back to bulk storage tanks installed in the oil store

A multi-purpose workshop is designed to accommodate:
• 5 x Lexus bays, 10 x Toyota bays, 4 x Express bays
• 2 x Detail bays, 1 x Wash bay, 1 x Coaster wash bay
• 1 x Carwash and 7 x Spare bays for future expansion
• Vehicle lifts installed: 22 x 3.5t in-ground piston lifts
• 1 x 6t platform wheel alignment scissor lift
• A fully piped fluid reticulation network supplies all workbays with oil, fluids, water, air and incorporates waste oil evacuation lines back to bulk storage tanks installed in the oil store

Gantry/Workbench/Storage Detail
• Modular workbenches and storage solutions. Options are many, from several ranges available or custom built
• Hose reels can be mounted on gantries or enclosed within workbench cabinets under the bench top

All workshop facilities detailed to accommodate a full range of vehicle hoists including 4 post, 2 post, wheel alignment and inground scissor lifts

• All service work bays access the sliding rail fume extraction system network
• A fully piped fluid reticulation network supplies all work bays with oil, fluids, water, air and incorporates waste oil evacuation lines back to bulk storage tanks installed in the oil store 

A compact workshop fitout may include:
• Workshop size is no limitation as evidenced by this plan that accommodates 10 vehicle hoists within fully optioned work bays
• Space saving hose reel gantries supplying air, and oil service workbays from both sides
• Also specified: new & waste oil tanks, ATF & coolant trolleys

Product

Alemlube Automotive Premium 3D Wheel Aligner

Product Code: AAPWA3D

• Compact targets with no electronics and batteries
• Comprehensive wheel alignment software and database
• Large 27" LCD display
• Compact console
• Ergonomic design and easy accessibility during maintenance operations
• WiFi connection for automatic software updates
• Data management & display program in Windows 10
• 4-point clamps 12"-24" with universal grips and targets
• High definition cameras
• Camera support with manual control
• Guided and simple operating procedure
• Premium turntables
• Supplied with two mechanical turntables for cars, brake pedal depressor & steering wheel holder

Product

5.0T 4-Post Electro-Hydraulic Hoist

Ravaglioli

Product Code: RAV4501L

• Long 5,700mm platform with adjustable width
• Automatic mechanical backup safety devices with pneumatic release
• Automatic anti toe trap alarm during final stages of lift descent
• Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking

RAV4502L Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates

Product

4.5t Low Profile Motor Vehicle Alignment Scissor Lift

Product Code: AA45LPAS

• Low profile scissor lift designed for precise wheel alignment procedures and general under vehicle service operations
• Cost saving ‘on ground’ installation
• Integrated rear wheel slip-plates
• Heavy duty lifting capacity of 4,500kg
• Maximum lifting height of 186mm
• Minimum lowered height of 180mm
• Overall length 6,500mm
• Overall width 2,070mm
• Platform width 635mm (each)
• Width between platforms 800mm 
• Air operated safety lock system
• Economical 3 phase power
• Aluminium motor for improved cooling capacity during high work demands
• Low voltage controls offer greater operator safety
• Quality components throughout including Italian made hydraulic pumps
• Optional rolling hydraulic jacking beams available
• Compliant with Australian Standards
• Manufactured to stringent European CE Standards

Product

5T Scissor Lift with Wheel Free Device

Ravaglioli

Product Code: RAV650.2.55

• Lifts with large size platforms and sturdy structure assuring maximum rigidity and working stability
• Platforms for total wheel alignment, with front turning plates locations
• Rear slip plates with pneumatic locking in true position
• Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position